US CA EU
A 100% Employee Owned Company


You Are Here: Product Detail


Thin Wafer Head - #3 Wing Drill - #2 Phillips

ZOOM 1 
Fastener Classification
Heavy Gauge Metal (18 or thicker)
Fastener Head
Thin Wafer
Fastener Drive
#2 Phillips
Fastener Length
1-7/16"
Fastener Gauge
#10
Fastener Point
#3 Wing Drill
Fastener Package Type
Packaged Screws
Fastener Package Weight
Bulk Box
Approx. Pcs.
4,000
Fastener TPI
24
Fastener Coating
GrabberGard
Fastener Color
Gray
 
Related Items  
Item No. Description      
101716W3RG 10 x 1-7/16-in, Thin Wafer Head, Drill Point, Phillips,GrabberGard, Bulk (Approx. Pcs. 4,000)

Attaches 3/16” to 3/4” plywood to 20-8 gauge metal. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure.

Specifications:

Gauge:                #10
Length:               1-7/16-in
Head Type:          Thin wafer
Recess Type:       #2 Phillips
Thread Type:       Single lead
Coating:              GrabberGard

24 threads per inch
Superfast #3 drill point
Thin wafer head provides a flush finished surface
Winged point creates pilot hole through the plywood

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out of the work surface.
  • The fastener must penetrate beyond the metal three full thread pitches.

GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films. 

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.