Attaches 1-in or thicker plywood to 20-8 gauge metal. 

Specifications:

Gauge:                #12
Length:               2-in
Head Type:          Flat head
Recess Type:       #3 Phillips
Thread Type:       Single lead
Coating:              Clear zinc

24 threads per inch
Superfast #3 drill point
Flat head provides a flush finished surface
Winged point creates pilot hole through the plywood

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.

• The flat head is fully seated when the head is flush with the work surface.
• Overdriving my result in fastener failure or strip out of the work surface.
• The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.