|
|
| You Are Here: |
Fastener Solutions > Screws > 7 x 7/16-in, Pan Head, Streaker®, Phillips, 20TPI, Phosphate, Bulk (Approx. Pcs. 15,000) |
|
|
|
7 x 7/16-in, Pan Head, Streaker®, Phillips, 20TPI, Phosphate, Bulk
23F
Features:
Attaches light gauge metal to metal where high torque is required. With a super sharp 23° Streaker® point and 20 threads per inch,...
|
|
|
|
|
|
|
Attaches light gauge metal to metal where high torque is required. With a super sharp 23° Streaker® point and 20 threads per inch, you get quick and easy penetration into 20-25 gauge metal studs.
Specifications:
Gauge: #7
Length: 7/17-in
Head Type: Pan framing
Recess Type: #2 Phillips
Thread Type: 20 TPI Twin lead
Coating: Gray phosphate
Installation Guidelines:
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The pan head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.
|