A 100% Employee Owned Company

You Are Here: Product Detail

Thin Wafer Head - #3 Drill - #2 Phillips

Grabber Means Quality Fasteners Technical Data
Product 268 Grabber Cement Board Self Drilling Screw Technical Data
Cement Board Applications Brochure
Grabber Cement Board Drivall® Screws (268) Submittal Form
MSDS/SDS Statement for Grabber Fasteners SD
Grabber Professional Grade Fasteners Video
Bulk Box 5lb Box 1lb Box Mini Pack
Item No. Description      
GCB8125SD 8 x 1-1/4-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 5,000)
GCB8158SD 8 x 1-5/8-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 4,000)
GCB8238SD 8 x 2-3/8-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 3,000)
GCB10350SD 10 x 3-1/2-in, Flat Wafer Head, Drill Point, Phillips, GrabberGard Gray, Bulk (Approx. Pcs. 1,000)
Grabber Cement Board and High Density Sheathing Screws have been specifically designed for use with Cement board and High density exterior sheathing. These exterior grade GrabberGard corrosion resistant fasteners have a .40” (10.5mm) wafer head with nibs to facilitate seating and minimize strip out. Grabber drill point screws are for use for the attachment of these boards to steel from 20 to 14 gauge.

Grabber Cement Board Screws meet the USG Durock specification for minimum head diameter of 0.400”.

Gauge:                #8
Length:               1-1/4-in
Head Type:          Flat wafer with counter sinking nibs
Head Diameter:    .40 inch
Recess Type:       #2 Phillips
Thread Type:       Single lead
Point:                  Drill point
Coating:              GrabberGard® superior corrosion protection.

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 4000 RPM.

  • Install with head flush with board, not need to counter sink.
  • Overdriving may result in failure of the fastener or strip out of the
  • work surface.

GrabberGard exterior grade coating
GrabberGard® metal finish is a high-grade proprietary metal surface processing technology that prevents corrosion. It is a duplex coating constituting a zinc substrate and organic polymer topcoat. The distinguishing feature of GrabberGard® is the joining and encapsulation the substrate with the fused organic surface coating. These layers are bonded together through thermal fusion, and this unique method of combining layers results in a combination of the coating films.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280 and ESR 1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.