|
|
| You Are Here: |
12 x 3/4-in, Hex Head, Drill Point, Clear Zinc, 1-lb (Approx. Pcs. 129) |
|
|
|
Fastener Classification
|
Heavy Gauge Metal (18 or thicker)
|
|
Fastener Head
|
Hex
|
|
Fastener Drive
|
Hex
|
|
Fastener Length
|
3/4"
|
|
Fastener Gauge
|
#12
|
|
Fastener Point
|
#3 Drill
|
|
Fastener Package Type
|
Packaged Screws
|
|
Fastener Package Weight
|
1lb Box
|
|
Approx. Pcs.
|
129
|
|
Fastener TPI
|
14
|
|
Fastener Coating
|
Clear Zinc
|
|
Fastener Color
|
Gray
|
|
|
|
|
|
|
|
Attaches heavy gauge 20-8 ga. metal to metal. Hex head framing screw used in heavy gauge metal to metal applications where high torque is required.
Specifications:
Gauge: #12
Length: 3/4-in
Head Type: Hex framing
Thread Type: Single lead
Coating: Clear zinc
Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
- The hex head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out of the work surface.
- The fastener must penetrate beyond the metal three full thread pitches.
Hydrogen Embrittlement:
Grabber’s 10, 12 & 14 gauge zinc-plated drill point fasteners are manufactured in ISO 9002 factories, plated as prescribed in the ASTM F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners, and post-plating baked according to the process articulated in SAE AMS 2759/9, Hydrogen Embrittlement Relief (Baking) of Steel Parts, Section 3.3.3.1, and SAE J78, which calls for a four-hour minimum time for baking out entrapped hydrogen after acid treating the parts.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. 
|